Issue:

Bulidout.cfg from installer:

    [buildout]
    extends = https://lab.node.vifib.com/nexedi/slapos/raw/1.0.112/software/
    erp5/software.cfg
    shared-part-list =.
           /opt/slapgrid/read_only_shared
          /opt/slapgrid/shared

https://lab.node.vifib.com/nexedi/slapos/raw/1.0.112/software/erp5/software.cfg

 

    [buildout]
    extends =
      ../../stack/erp5/buildout.cfg



    # Test Suite: ERP5-MASTER ran at 2019/06/20 17:16:16.546716 UTC
    #             10 failures, 0 errors, 6038 total, status: FAIL

    [erp5]
    revision = 80994259537cc30d255d9230aabaf47dce621bf8

 

https://lab.node.vifib.com/nexedi/slapos/raw/1.0.112/stack/erp5/buildout.cfg

 

    [erp5]
    recipe = slapos.recipe.build:gitclone
    repository = https://lab.nexedi.com/nexedi/erp5.git
    branch = master

 

Docs:

https://pypi.org/project/slapos.recipe.build/#revision-branch-priority

    If both revision and branch parameters are set, revision parameters is used
    and branch parameter is ignored:

 

as thre result installer trying ro install 
80994259537cc30d255d9230aabaf47dce621bf8 revision.